Metal Finishing Dust Collection
Qintellim SCC and SCC PRO are wet dust collectors evaluated for metal grinding, deburring, sanding, edge rounding, brushing and polishing equipment. Final selection depends on the connected machine, material and dust characteristics, airflow and static-pressure requirements, duct layout, operating hours and local safety requirements.
Confirmed starting point: 5.5 kW wet dust collector for a single finishing machine or compact production cell.
Confirmed starting point: 7.5 kW wet dust collector for higher dust loads and medium or larger metal-finishing lines.
Engineering and safety boundary: A wet dust collector is not automatically suitable or compliant for every combustible-metal-dust application. Aluminum, magnesium and other potentially combustible dust applications require a site-specific risk assessment, confirmed system design and review against applicable local requirements.
SCC is a 5.5 kW starting point for a single finishing machine or compact cell. SCC PRO is a 7.5 kW starting point for higher dust loads and medium or larger lines. The final choice still depends on airflow, static pressure, ducts, material and dust conditions.
Provide the connected machine and process, material and dust characteristics, extraction ports, duct size and length, operating hours, voltage, available space and applicable local requirements.
No. Suitability and compliance require a site-specific risk assessment, confirmed system design and review against the regulations and standards that apply at the installation location.
Product Family Guide
Choose a Metal Finishing Equipment Family
Start with the required process result, then continue to the dedicated family page for machine configuration, tooling and quotation information.
Working width, conveyor platform and station arrangement are confirmed by machine family and project requirements.
