Categories

Three Qintellim Deburring Machines Support Two-Shift Sheet Metal Production in Asia

An Asian sheet metal fabricator operates three Qintellim R and RS Series deburring machines for up to 15 machine operating hours per day across two shifts. This customer application case explains the production logic, machine roles and buyer takeaways without disclosing the customer’s name or exact location.
Jul 16th,2026 40 Views

An established sheet metal fabrication customer in Asia operates three Qintellim deburring machines from the R and RS Series. Under a two-shift production arrangement, the machines support up to 15 machine operating hours per day.

This customer application case is based on real factory footage authorized for public display. The customer’s company name and exact country or region remain confidential, so the information below focuses on the production requirement, equipment roles and practical points relevant to industrial buyers.

Customer Application Overview

Industry Sheet metal fabrication
Region Asia; exact location confidential
Installed equipment Three Qintellim machines from the R and RS Series
Operating arrangement Up to 15 machine operating hours per day across two shifts
Factory display Customer-site environment shown with permission

Customer Production Requirements

Sheet metal fabricators rarely process only one part type or one burr condition. A normal production mix may include components cut by laser, punching or other processes, with differences in material, thickness, geometry, burr height and downstream requirements. Some jobs mainly need burr removal and surface grinding, while others also require consistent edge rounding before coating, welding, assembly or handling.

When this workload is handled manually, result consistency can depend heavily on the operator, tool condition and time available for each part. Under a multi-shift schedule, those variations become more difficult to control. The customer therefore installed three machines to distribute the workload and match different finishing requirements more efficiently.

Why the Customer Uses Both R and RS Series Machines

R Series: Dedicated Deburring and Surface Grinding

The Qintellim R Series uses one or more independently controlled abrasive-belt stations. Depending on the selected configuration and process settings, the series can support burr removal, surface grinding, oxide-scale cleaning and preparation before downstream manufacturing steps.

A dedicated R-Series route is useful when the main purchasing priority is controlled material removal with abrasive-belt consumables. Actual results depend on the workpiece material, burr condition, abrasive specification, feed speed, contact pressure and machine configuration. The customer’s exact R-Series models and station split are not disclosed in this case.

RS Series: Deburring Combined with Edge Rounding

The Qintellim RS Series combines a deburring station with an edge-rounding station. This arrangement is suitable when a component needs burr removal followed by a smoother and more consistent rounded edge in one processing route.

Using R and RS Series machines in the same workshop gives the customer two complementary process paths: dedicated abrasive-belt deburring for appropriate jobs, and combined deburring plus edge rounding where the drawing, handling requirement or downstream process calls for a rounded edge. The correct route is selected according to the actual part rather than forcing every workpiece through the same process.

What the Customer-Site Footage Demonstrates

The authorized factory footage shows three Qintellim machines installed in an active sheet metal production environment. It records operators feeding and receiving large flat workpieces, machines running in the customer’s normal workshop and finished parts moving through the production workflow.

This is valuable purchasing evidence because it shows the equipment outside a showroom or staged sample test. At the same time, the footage should not be interpreted as proof of a fixed production capacity, zero downtime or a guaranteed result for every material. Those conclusions require part-specific test data and a confirmed configuration.

What “Up to 15 Machine Operating Hours per Day” Means

The 15-hour figure describes machine utilization, not the working time of one employee. The customer organizes production across two shifts, allowing the equipment to support an extended daily schedule while operators rotate according to the factory’s staffing plan.

Long daily operating time is relevant to buyers because it increases the importance of repeatable settings, abrasive planning, routine inspection, dust-control performance and preventive maintenance. However, operating duration alone does not determine finishing quality. Stable results still depend on:

  • matching the machine route to the actual burr and edge requirement;
  • selecting suitable abrasive type and grit;
  • setting feed speed and station parameters for the material and thickness;
  • checking consumable wear and replacing abrasives at the correct interval;
  • maintaining the conveyor, hold-down system and dust extraction according to the operating plan;
  • testing representative workpieces before the final machine configuration is confirmed.

What Industrial Buyers Can Learn from This Installation

1. Define the required result before selecting stations

A buyer should first separate burr removal, surface finishing and edge-rounding requirements. The required station combination follows the target result; it should not be chosen only from a model name or a general machine category.

2. Different workpieces may justify different machine routes

For factories with a broad product mix, a dedicated deburring machine and a combined deburring-and-edge-rounding machine can serve different job families. This can reduce unnecessary processing steps and make production planning clearer.

3. Multi-shift production requires an operating plan

A machine selected for extended daily use should be evaluated together with abrasive consumption, changeover time, dust collection, operator training, routine inspection and maintenance access. These factors affect the practical cost of ownership as much as the headline machine specification.

4. Representative sample testing remains essential

Before purchase, buyers should provide real parts or representative samples. Material grade, dimensions, thickness, cutting method, burr condition, desired edge radius and surface requirement allow the supplier to recommend a more defensible process route and demonstrate the expected result.

Request a Machine Recommendation

Qintellim is a metal deburring and surface finishing equipment manufacturer serving sheet metal processors with configurable R, RS and other process series. To evaluate a project, send the following information:

  • material type and grade;
  • minimum and maximum part dimensions;
  • thickness range and cutting process;
  • photos of the burr, slag or surface condition;
  • required edge result or target radius;
  • daily production target and shift schedule;
  • available dust-collection and plant conditions.

Qintellim can then recommend a representative configuration and arrange a workpiece test before the final technical proposal is confirmed.

Need a Machine Recommendation?

Send Your Material, Burr Condition and Finish Target

QintelliM can recommend a suitable deburring, edge rounding, oxide removal, slag removal, brushing, polishing or dust collection configuration based on your parts and production needs.

Get Machine RecommendationView Machines