Qintellim uses station-based series codes so manufacturers can understand the process route before selecting a specific machine width or conveyor platform. R means a deburring station using sanding belt consumables, S means an edge rounding station using rotary roller brushes, C means a heavy-slag removal station using alloy hammer tooling, and W means a brushing or polishing station. Conveyor platforms are selected separately: A is vacuum holding and M is magnetic holding.
The right series is determined by the condition entering the machine and the result required when the part leaves it. Station quantity and sequence can be customized, and Qintellim working widths are available in 450, 630, 800, 1000, 1300, and 1600 mm.
| Series | Typical process | Best suited for |
|---|---|---|
| RR | Two-stage deburring | Heavy burr removal and controlled secondary grinding |
| RRS | Grinding, grinding, edge rounding | Parts requiring burr removal and consistent rounded edges |
| S | Edge rounding | Parts where edge treatment is the primary requirement |
| RRW | Grinding, grinding, brushing | Deburring followed by directional or decorative finishing |
| RSRW | Grinding, edge rounding, refinement, brushing | Multiple finishing requirements in one automated pass |
| CR | Alloy-hammer slag removal and grinding | Plasma- or flame-cut parts with large slag |
| CRSR | Slag removal, grinding, edge rounding, refinement | Heavy slag removal plus finished rounded edges |
Start with five facts: material, cutting process, maximum part dimensions, burr or slag condition, and required finish. A laser-cut stainless-steel part requiring a brushed finish has a different process route from a flame-cut carbon-steel part carrying large slag. Production volume, smallest part size, dust-collection method, and automation requirements also affect the final configuration.
Qintellim recommends representative sample testing before the final station sequence, conveyor platform, working width, and consumables are confirmed.
Yes. Configurations such as RRS, RSR, RRSR, and RSRW illustrate how stations may be repeated or reordered around the required result.
No. The process series and working width are separate configuration decisions. Qintellim offers 450, 630, 800, 1000, 1300, and 1600 mm widths.
Depending on the workpiece, an A vacuum, M magnetic, or A-M dual conveyor platform can be configured.
Need a Machine Recommendation?
Qintellim can recommend a suitable deburring, edge rounding, oxide removal, slag removal, brushing, polishing or dust collection configuration based on your parts and production needs.