Shandong QintelliM Co., Ltd. was established on 15 August 2012 and has maintained an R&D department since its establishment. Research, development and manufacturing since 2012 support its work on sheet metal deburring, edge rounding and surface finishing machinery.
The same functional family can use different station arrangements. RRS places two R stations before S; RSR places a second R station after S. Working width is selected around part orientation and loading, and must not be confused with the overall machine width.
Define the control functions, operator interface, power supply and line-integration scope in the project specification. The approved configuration, not a series label, is the reference for delivered electrical data.
| Engineering area | Workpiece input | Decision to confirm |
|---|---|---|
| R deburring | Incoming burr, material and required surface | Abrasive belt and processing sequence |
| S edge rounding | Internal/external geometry and target edge condition | Rotary roller brush and inspection method |
| W finishing | Brushing direction or finishing reference sample | Brushing or polishing roller; separate W stages if both are required |
| Part holding | Magnetic response, flatness, openings and contact area | A vacuum, M magnetic or A-M combined platform |
Record the input condition, station route, tooling, process settings and observed result together. Where a numerical result is needed, retain the measurement method and evidence. Demonstration footage alone cannot establish a guaranteed result for another workpiece.
Translate the application into an agreed machine specification: process stations and order, working width, holding platform, electrical requirements and the required finishing operation. Confirm any custom mechanical layout or control integration as part of the individual project.
Send your material grade, part drawings or dimensions, cutting method, incoming burr or slag condition, required edge and surface result, and production demand. QintelliM can review the station route, workpiece holding and acceptance criteria for your application.