QintelliM Manufacturing & Factory

Research & Manufacturing · Established 2012

QintelliM develops and manufactures sheet metal deburring, edge rounding and surface finishing machinery. Established in 2012 with an R&D department from the outset, the company brings research and production together.

Explore our workshop, assembly work, machine components and protective packaging through original factory photographs and short videos.

Manufacturing Overview

Inside the QintelliM workshop, technicians work on machine frames, housings and mechanical assemblies. Explore the workshop layout, machines and components in the original photographs and factory footage below.

Workshop Walkthrough

A short view along the workshop aisle, showing metal finishing machines in different arrangements. Silent footage · 16 seconds.

Open video directly

Workshop, Assembly & Components

Workshop aisle with metal finishing machines and machine frames.
Workshop aisle
Metal finishing machines arranged along the workshop floor.
Machines on the workshop floor
Technicians working on a machine frame during assembly.
Machine-frame assembly
Technicians working at the upper machine housing during assembly.
Machine-housing assembly
Open machine enclosure showing abrasive-belt assemblies and internal components.
Internal abrasive-belt assemblies
Wrapped roller components with shafts, arranged together for storage.
Roller storage

Production Workflow

Production planning connects material preparation, component assembly, machine assembly, electrical integration, commissioning and packing. The configuration, inspection requirements and delivery schedule are agreed for each order.

Mechanical Assembly

Machine frames, housings, conveyors and drive components come together during assembly. The selected processing stations and workpiece-holding platform determine the machine arrangement.

See frame-joint grinding, machine assembly and conveyor installation in the workshop footage below.

A technician grinding a joint on a machine frame during fabrication.
Machine-frame joint grinding

Machine Assembly Area

A workshop walkthrough showing open machine frames, conveyor assemblies and enclosed machines along the aisle. Silent footage · 17 seconds.

Open video directly

Open-Frame Assembly Work

A close view around an open machine frame, showing conveyor and drive components and a technician working on the assembly. Silent footage · 24 seconds.

Open video directly

Mechanical Assembly

A technician working on the internal mechanical assembly of a machine. Silent footage · 12 seconds.

Open video directly

Conveyor Installation

Technicians positioning a conveyor assembly at a machine frame in the workshop. Silent footage · 13 seconds.

Open video directly

Electrical Integration

Electrical integration follows the machine configuration. Discuss your power supply, control functions, operator interface and any production-line connections when defining the order.

Machine Commissioning

Commissioning requirements include no-load operation and functional checks before inspection preparation. Agree the checks and acceptance criteria for your machine; its commissioning and inspection records establish the actual results.

Application Testing

For an application review, provide representative workpieces and describe the incoming burr or slag, material, dimensions and required edge or surface finish. Test conditions and acceptance criteria should match your application. Results depend on the workpiece and agreed machine configuration.

Packing & Shipment Preparation

Protective wrapping and wooden bases are shown below. Packing follows the agreed inspection stage in the production plan. Confirm the packing method and delivery documents for your order, including operating instructions, inspection records and spare-parts information.

A machine and adjacent equipment protected with foam sheets and stretch film in the workshop.
Protective wrapping for machines
Two compact equipment units wrapped with stretch film and placed on wooden bases.
Wrapped equipment on wooden bases

Protective Packaging

A technician applying protective packaging around a machine in the workshop. Silent footage · 10 seconds.

Open video directly

Custom Machine Configuration

R uses abrasive belts for deburring; S uses rotary roller brushes for edge rounding; W uses a selected brushing or polishing roller. Station quantity and physical order vary by configuration. Working width and A vacuum, M magnetic or A-M combined holding are specified separately for the workpiece. Independent brushing and polishing require separately specified W operations.

Abrasive-belt assembly inside a metal finishing machine.
Abrasive-belt assembly
Motor and drive components inside the machine enclosure.
Motor and drive components
Conveyor belt and external drive components at the machine opening.
Conveyor and drive components

Related Machines

Contact / RFQ

Send your material grade, part drawings or dimensions, cutting method, incoming burr or slag condition, required edge and surface result, and production demand. QintelliM can review the station route, workpiece holding and acceptance criteria for your application.