Categories

800RW-A Process Demonstration: Deburring and Surface Finishing with R-W

A public 800RW-A process demonstration showing the R-W route, A vacuum conveying and visible finished-part appearance, with unmeasured results clearly identified.
Sep 16th,2026 103 Views

PROCESS DEMONSTRATION · 800RW-A · R-W

This demonstration shows a QintelliM 800RW-A configuration using an R abrasive-belt station followed by one W brushing station for surface finishing on an A vacuum platform. The footage presents the machine route, part conveying and visible finished-surface appearance. The exact brushing-tool specifications, material grade, thickness, surface roughness, processing speed and production result must be confirmed for the specific application.

What Was Demonstrated

The public QintelliM video identifies the machine as 800RW-A and shows loading, machine operation, conveyor output and completed-part appearance. Its published description identifies the R-W process and A vacuum adsorption platform. This page documents that process demonstration; it is not a performance test report, certified test, production capacity test or customer acceptance report.

Watch the original 800RW-A process demonstration on YouTube. Source: QintelliM public video, published July 14, 2026. The filming location and whether it was a factory or customer-site demonstration are not stated.

Machine Configuration: R → W

R: abrasive-belt deburring / grinding

The R station uses an abrasive belt for deburring and grinding. The abrasive and contact settings must be chosen for the workpiece and required removal. The demonstration does not state the abrasive grit, contact setting or a measured burr-removal percentage.

W: brushing in this demonstration

QintelliM has confirmed that the W station in this 800RW-A demonstration is configured for brushing. QintelliM generally prioritizes brushing configurations; polishing tooling is fitted when requested for a specific customer application. Detailed brushing roller specifications are not stated here.

One W station performs brushing OR polishing with the selected W tooling. In this demonstration, that selected step is brushing.

Two independent brushing and polishing steps require evaluation of two W stations or another confirmed project configuration. This R-W demonstration does not establish two separate W operations. See the R and W station configuration codes for the meaning of the process letters.

For commercial configuration options, visit RW-Series Deburring & Surface Finishing Machines.

Holding Method: A Vacuum Platform

The public video description and current RW-Series page identify A vacuum holding for this 800RW-A demonstration. This does not establish that the same setup is suitable for every thin, small or non-magnetic part.

Holding must be reviewed against effective contact area, geometry, flatness, perforations and processing load. Use the Vacuum vs Magnetic Conveyor Guide to frame the selection questions, then confirm the platform using representative workpieces.

Surface Result Observed

The presented parts show a directional surface appearance and visible differences in texture and reflection. These observations describe what can be seen under the recording conditions; they are not measurements of Ra, specified roughness, mirror-finish grade or guaranteed grain.

Visible sample comparison: the public source does not establish that the displayed samples are the same part or a controlled pair from the same batch. The comparison is therefore an observed surface difference, not a quantified before-and-after test.

What This Demonstration Shows

  • A real machine operating along the R-W route identified in the public source.
  • Workpiece loading, conveying and output on the identified A platform.
  • A W brushing step following the R abrasive-belt station, with the brushing configuration confirmed by QintelliM.
  • Visible completed-part appearance and sample comparison.

What This Demonstration Does NOT Prove

The video alone does not establish guaranteed Ra, a mirror-finish grade, burr-removal percentage, fixed feed speed, cycle time, throughput, production capacity, tooling life, universal material compatibility, all surface finishes, long-term production stability or customer acceptance. Edited video duration is not a production cycle-time measurement.

Confirmed Details and Information Not Stated

Item Evidence status
Machine / family / route / holding Confirmed in current public sources: 800RW-A / RW Series / R → W / A vacuum platform.
Material and upstream process Exact material grade, thickness and upstream cutting method: not stated.
Tooling and settings W function in this demonstration: brushing, confirmed by QintelliM. Abrasive grit, detailed brushing roller specifications, feed speed and pressure / contact setting: not stated.
Measured surface and removal results Ra, mirror-finish grade and removal percentage: unknown; no measurement record is provided.
Production and acceptance Cycle time, throughput, capacity, tooling life, long-term stability and customer acceptance: not established.
Comparison control and filming location Controlled before/after pairing and factory or customer-site location: not stated.

Review Your Surface-Finishing Application

Provide representative parts or drawings, material and thickness, the upstream cutting process, burr condition, part dimensions and perforations, the target surface appearance and any measurable acceptance criteria. Include your production requirements so the route, tooling and holding can be reviewed together.

Use the Sample Testing Guide to prepare a representative review. Agree the inspection method and acceptance criteria before treating a sample result as evidence for your application.

Request a Surface Finishing Sample Test

QintelliM is the brand of Shandong QintelliM Co., Ltd.

Need a Machine Recommendation?

Send Your Material, Burr Condition and Finish Target

QintelliM can recommend a suitable deburring, edge rounding, oxide removal, slag removal, brushing, polishing or dust collection configuration based on your parts and production needs.

Get Machine RecommendationView Machines